NMDTX-CT2 Long Range Transmitter with Chair Pressure Sensor Pad
? Transmits an alarm signal to carer pagers when a patient rises from their chair? Typical transmission range of up to 400M
? Suitable for Care Homes, Hospitals and stone-built properties
? Programmable with identification message default message Chair Alarm 1
The NMDTX is a high performance POCSAG messaging transmitter with multi-function selection for chair/bed occupancy notification, floor pressure mat and door contact alarm. See additional features below. As a chair monitor the alarm notification can be selected for instant, 15 and 30-minute delay. With a battery life of 12-months it is economical to use too.
Key Features
- Provides wireless notifications to a person leaving and returning to their chair
- Wireless operating range of up to 400M (open field)
- Option for personalised notification message (if used in a multiple monitoring system)
- Compatible with Medpage EM300 and EM400 data message pagers
- Quick and easy to install and operate
- Receive pager notifications for exit and return to chair
| Technical Features NMDTX |
|---|
| Multi-Function sensor transmitter |
| Long range transmission (up to 400M) |
| 2 x Trigger Input Sockets 2.5mm & 3.5mm |
| Trigger mode selectable for N/O or N/C |
| Secure On/Off Power switch (selectable) |
| FSK transmission 433.92MHz @ 10mW |
| POCSAG Message programmable |
| Optional programming software available (for trade only) |
| Dimensions: L 145mm W 40mm D 22mm |
| Powered by 2 x AAA batteries |
| 12 Month typical use before battery change |
| Low battery warning LED with transmission message |
| System status LED |
| Mode Selection Options: |
| Bed/Chair leaving alarm (with 15-minute alarm delay option) |
| Floor pressure mat alarm |
| Magnetic door sensor alarm (with door open timer) |
| Water level & Enuresis sensor detection |
| Programmable alert messages (when used with data pager EM300) |
| Pre-programmed standard messages for Bed, Door, Floor mat. |
| Multi-Receiver addressable |
| Technical Features CT2 Chair Sensor Pad |
|---|
| CT-2 Chair sensor (380mm x 300mm) |
| 3M connector lead |
| Connector: 2.5mm mono Jack plug |
| Silver lined anti-corrosion switch contact |
| Durable, flexible material |
| Resistant to diluted disinfectants |
| Compatible with |
|---|
| CT-3 Alarm controller |
| NMDTX (long range transmitter) |
| NMDTXM (standard multi-function alarm transmitter) |
| CTMV Recordable voice alarm receiver |
NMDTX-CT2 Long Range Transmitter with Chair Pressure Sensor Pad
- Product Code: NMDTX-CT2
- Availability: In Stock
-
£91.09
- Ex Tax: £75.91

