MPRCG2 (2026) Chair Leaving Detection Alarm with Caregiver Radio Pager

✓ Fall prevention chair leaving detection alarm with radio pager
✓ Raises an instant warning alarm to a caregiver when a person rises from their chair
✓ Quick and easy install ready to use straight out of the box
✓ Can be used singularly or as part of a multiple resident monitoring system

Included: 1 x BTX-21MP sensor alarm control transmitter, 1 x MP-PAG31 caregiver radio pager, 1 x CT2 chair pressure mat sensor with connector cable, all required batteries.

The MPRCG2 is an all-inclusive kit to monitor a persons chair. The pressure sensor is placed under the chair cushion, or on top with a suitable material cover. When the person stands up from their chair the alarm transmitter signals the caregiver radio pager.

Key Features

• Fall prevention chair leaving detection alarm
• Exit notification relayed to caregiver via radio pager
• Antimicrobial disinfectant resistant sensor material
• Portable all battery-operated system
• Suitable for most chair types including wheelchairs
• Quick and easy setup and use
• 3-Channel pager can be used with 3 transmitter devices
• Add optional bed sensor, movement sensor, door contacts etc.

Technical Features CT-2 Chair Sensor
CT-2 Chair sensor (380mm x 300mm)
3M connector lead
Connector: 2.5mm mono Jack plug
Silver lined anti-corrosion switch contact
Durable, flexible material
Resistant to diluted disinfectants

Technical Features BTX21-MP Sensor Transmitter
Sensor triggered transmitter
Transmission frequency: 433MHz
Transmission range: 75-150M
Powered by 3 x AA 1.5V batteries
DC power adaptor input: 6V @1 amp (optional)
Output 6.33mm socket for nurse call connection
Input 6.3mm socket for cabled nurse call switch
Dimensions: 115mm x 75mm x 30mm
Locking (screw) battery compartment
Concealed external on/off switch
Connector cable strain relief clamp
Selectable alarm delay 2 seconds, 15 minutes
Wall fixing bracket included

Technical Features (MP-PAG31 Pager)
Power source: 2 x AA batteries
Receiver range: 100 metres
Radio frequency: 433MHz
Dimensions: L: 80mm x H: 52mm x W: 25mm
Weight: 63g (without batteries)
Learns in (pairs) with 3 transmitters
3 Channel pager receiver with LEDs for Sen 1, Sen 2, Sen 3
Volume/vibration select button
Alarm cancel/reset button
Strong belt clip and lanyard attachment clip
Simple transmitter pairing
Status indicator LED: Low battery, active alarm
Alert options: Vibrate only, vibrate and low tone or vibrate and high tone volume
Pager low battery warning and sensor low battery (with compatible transmitters)
Side power On/Off switch