NMDRX-CTMFP Floor pressure mat alarm with transmitter & portable alarm

? Floor pressure mat alarm with audible & flashing light carer alarm receiver
? Useful for hearing impaired carers to respond to a partner wandering
? Wireless alarm receiver can pair with up to 5 individual care sensor transmitters
? Quick and easy to install wander detection alarm

This kit includes the CT-3 pressure sensor, NMDRX audible/flashing light alarm and the CTM-3 voice alarm transmitter. A warning message can be recorded for playback when a person stands on the mat while a signal is simultaneously transmitted to activate the NMDRX warning alarm.

Visual and audible alerts to pressure sensor activation
Use for wander detection, bed exit warning, general security applications
Quick and easy to install all radio signal items already paired
Pressure mat activation of personalised recorded warning be careful near the stairs
Economical battery consumption typically 6 months

Technical Information CTM-3 Alarm controller
Integral transmitter with operating range of 100M
Alarm activation: Instant (3 second) or 15 minute delayed alarm
Recordable alarm playback message of up to 15 seconds
Detection mode selectable for bed sensor or floor pressure mat
Selectable alarm playback volume: silent 90dB
Dimensions: H 11cm W 7cm D 2cm
Weight (including batteries) 131g
Supplied with bed/wall mounting bracket
Powered by 3 x AAA batteries or optional AC adaptor
Low battery warning LED's
Visual alarm active indication
Test/reset alarm button
Frequency 433MHz @10mW
Optional A/C power adaptor

Technical Information NMDRX Alarm Receiver
Selectable LED colours to identify transmitter device
Multiple active alarm indication - selected transmitter colours flash alternately until alarms are cancelled
Powered by 3 x AAA batteries
Dimensions: H 80mm W 68mm D 38mm
Optional mains AC power adaptor
Compatible with all Easylink/Medpage transmitters
Quick and easy to set up and use
3-level alarm tone volume switch (up to 96dB)
Latched or timed alarm duration (continuous or 30 seconds)
Power/signal/battery status LED
Output for vibrating pad to aid deaf people
Frequency 433 MHz
Long range capability
Vibrating pad output 3v @ 300ma via 3.5mm jack socket
Top focusing lens high intensity ceiling projecting LEDs
On/off top light selection switch

Technical Information CT-3 Pressure Mat
Dimensions: L: 750 mm x W 450 mm x 5 mm
Connection lead: 3M connector lead terminated with 2.5mm mono jack plug
Material: PVC