Manufacture & Supply of Care provider products, Telecare aids,
Radio paging products, Products for Deaf and hard of hearing people.

BSI Quality Assurance
Established 1984
Quality Product - Quality Service

Factory 4 -7
Grange Road Ind, Est,
Geddington, Northants.
NN14 1AL. UK
Tel: 01536 744 788
Fax 01536 744 988

Home Page

Epilepsy Alarms

Caregiver Electronic Alarms & Monitors

Remote Control Products & Radio Paging System

Products For Deaf & Hard Of Hearing People

About Easylink

Complete Product Listing Page

Contact Details

Ordering Details


Medpage Limited Website

New Products Available soon

Request a catalogue

Epilepsy alarms

Radio paging

Bed leaver alarms

Baby breathing monitor
alarm

Visit www.medpage-ltd.com
for more products, information and on-line ordering

Pressure Mat Alarm With Portable receiver - Shop doorways, restricted area, child’s bedroom, by grannies bed. This alarm uses a pressure mat connected to a transmitter. When someone stands on the mat the transmitter signals the battery operated portable receiver up to 100m away. Mat size 600mm x 450mm. Receiver power 2 x AA batteries (supplied). Transmitter power 1 x PP3 9 Volt battery. Receiver has Westminster chimes with low, high volume switch. Receiver dimensions: H 95mm W 60mm D 30mm. Transmitter Dimensions: H 135mm W 35mm D18mm. Radio address code by dip switch.

ORDER CODE DM-01 PRICE £54.00 + VAT ORDER ON-LINE

Pressure Mat Alarm With Radio Pager - Similar to the DM-01 except instead of a portable receiver, a radio pager with chime and vibrate options is used. The operating range is 100m. Pager operates from 2 x AA batteries with low battery warning. Can be worn using the belt clip or hung on a wall using a cord attachment. When someone stands on the pressure mat the pager will respond.

ORDER CODE DM-02 PRICE £54.00 + VAT ORDER ON-LINE

PIR MOVEMENT CONTROLLED LAMP KIT

Simple to use automatic lamp controller. Supplied with the kit is a PIR transmitter unit and 1 x power socket controller switch. The PIR unit operates from 3 x AAA batteries and contains a transmitter that sends on and off signals to a remote radio controlled power socket switch adaptor. With a lamp (up to 1000W) plugged into a socket switch, the PIR can be set to detect a person entering a room or badly lit area where the light switch may be some distance away. The PIR can be set to only activate when light levels are low. You can also adjust the time the lamp stays on for. After the required time-on, the PIR automatically sends a signal to switch the socket off. This function can be useful in children’s rooms or the elderly who may be at risk from falls in a darkened room.

1 x PIR transmitter with 1 x power socket switch (Lamp not supplied) Any table lamp can be plugged into the socket controller.

ORDER CODE PMCL-01 PRICE £26.75 + VAT.