Wireless nurse call system

WIRELESS NURSE CALL SYSTEM FOR SMALL TO MEDIUM SIZE CARE HOMES AND HOSPITALS

The range of Rondish wireless nurse call products are designed to accommodate the requirements of small to medium size care homes and hospitals. A simple, inexpensive system can easily be installed in under an hour. The main components are the Central Monitor that displays room and patient information, the Call Point Transmitters that the patient uses to call for assistance and wireless pull cord transmitters with wireless reset buttons for washroom use. Additional products such as pagers can be included or added at a later date if the requirement arises.

CENTRAL MONITOR NURSE CALL DISPLAY

The Central Monitor will receive and display signals from all patient call devices; washroom pull cord transmitters, bed head call point transmitters, bed and chair occupancy sensors, wristband transmitters and DoorWatcher anti-wander systems. When activated by a patient call, the CMU-02 produces an audible tone alarm with volume adjustment. The display will indicate the type of transmitter, toilet, bed head etc, with backlit display. The monitor also displays with audible alarm the condition of the system, radio interference problems, low battery warnings for all devices, missing or broken items. Any number of CMU-02’s can be used in a system. One per floor or area is recommended.

The CMU-02 is powered by 12V DC power adaptor with battery backup provided by 4 x D cell batteries. Dimensions: H 205 mm x W 145mm x D 42mm.

ORDER CODE CMU-02 PRICE Ł180.00 + VAT

Pull Cord Transmitter: (WCP-02 For bathroom, toilets and lounge areas. 85mm x 85mm x 10mm Powered by sealed in Lithium battery with a service life of five years. Reassurance LED lights to confirm operation to user. Fitted with 3M red pull cord with pull triangles. RF power 4mW max, narrow band digital transmission for maximum range and reliability. Range 25M. 100% waterproof making it suitable for bath-side or shower room fixing.

ORDER CODE WCP-02 PRICE Ł42.00 + VAT

Wireless Reset Button: (WRE-02) Required to reset WCP-02 pull cord transmitter. 85mm x 85mm x 10mm. Powered by sealed in Lithium battery with a service life of five years. Reassurance LED lights to confirm operation to user. RF power 4mW max, range 25M.

ORDER CODE WRE-02 PRICE Ł42.00

ILB-03 SIGNAL REPEATER WITH VISUAL AND AUDIBLE ALARM

The ILB-03 is a combined wall mounting audible-visual alarm with built in signal repeater. This dual function device re-transmits all data at higher signal levels to the CMU-02. The WRE-02 and WCP-02 bathroom transmitters may require a signal repeater as they are lower power than the call point transmitters.

Where a repeater panel is required in another area of the building the ILB-03 can be used as a general alarm for a group of rooms or patients, saving the requirement of a nurse call display for that area. Powered by 4 x D cell batteries.

ORDER CODE ILB-03 PRICE Ł78.00 + VAT

VOICE CALL POINT ANNOUNCEMENT PAGER

The PAG-03 is a lightweight pager with call display that also speaks call point identification numbers independently of the Central Monitor. The pager has a volume button for high or low volume. When a call point is pushed, or bed or chair sensor triggers the BTXV-NCT transmitter, the pager will announce the room or bed number. Note, the pager does not allow for zone location, IE: 00 for ground floor it will only announce the two digit room or bed numbers. Powered by 2 x AA batteries. Dimensions: W 80mm H 58mm D 18mm. Weight including batteries 116g. Simple low cost paging solution.

ORDER CODE PAG-03 VOICE CALL POINT PAGER PRICE Ł32.00 + VAT CLICK HERE TO SEE BED CALL POINTS