Wireless disabled toilet washroom alarms

Manufacture & Supply of Care provider products, Telecare aids,
Radio paging products, Products for Deaf and hard of hearing people.

BSI Quality Assurance
Established 1984
Quality Product - Quality Service

3 Melbourne House
Corby Gate Business Park
Priors Haw Road
Corby, Northants
N17 5JG

Tel: 01536 264 869
Fax 01536 269 719

Baby breathing monitor
alarm

Visit www.medpage-ltd.com
for more products, information and on-line ordering

WIRELESS DISABLED TOILET & WASHROOM EMERGENCY PULL CORD ALARMS
No mains power wiring required - Simply fix wireless parts to walls - No maintenance costs

RON-WC1 WIRELESS PULL CORD DISABLED BATHROOM & TOILET ALARM SYSTEM.

The RON-WC1 is designed to provide a visual and audible warning when a disabled person requires assistance when using a toilet or bathroom. The pull cord transmitter sends a radio signal to the emergency call alarm. The call alarm produces an adjustable volume tone alarm with bright flashing strobe LED’s to draw attention. The alarm is reset using a wireless reset button (green).

All system parts are battery operated with very long battery life, so no electrical wiring or professional installation is required. The system conforms to all safety and operational standards relating to alarms for the disabled.

The RON-WC1 can be installed and ready for use in under 10 minutes and is guaranteed to perform.

INDIVIDUAL PART COMPONENTS - SPECIFICATIONS

Emergency Call Alarm: (ILB-03 with built in signal booster) H 210mm W 145mm D45mm Operates from 4 x D cell batteries 24 months battery life. Sounder output 90dB @ 10cm (adjustable volume control). Built in high intensity LED strobe light. Simple transmitter code learning procedure to register multiple pull cord alarms. Simple wall fixing brackets. Responds to all programmed transmitter units.

Pull Cord Transmitter: (WCP-02) 85mm x 85mm x 10mm Powered by sealed in Lithium battery with a service life of five years. Reassurance LED lights to confirm operation to user. Fitted with 3M red pull cord with pull triangles. RF power 4mW max, narrow band digital transmission for maximum range and reliability. Range 25M. 100% waterproof making it suitable for bath-side or shower room fixing.

Wireless Reset Button: (WRE-02) 85mm x 85mm x 10mm. Powered by sealed in Lithium battery with a service life of five years. Reassurance LED lights to confirm operation to user. RF power 4mW max, range 25M.

RON-WC1 AS SHOWN ABOVE INCLUDING ALL BATTERIES AND REQUIRED FIXINGS.

ORDER CODE RON-WC1 Ł132.00 + VAT

CENTRAL MONITOR DISPLAY UNIT FOR MULTIPLE PULL CORD SYSTEMS

The Central Monitor CMU-02 can be used in buildings where multiple toilet alarms require a central alarm point. A receptionist or security office for example can receive alarm notifications with location of the toilet or washroom. Signal boosters can also be incorporated to extend the range of the pull cord and reset transmitters to reach the Central Monitor. The CMU-02 on alarm produces an audible alarm tone with backlit display of pull cord transmitter identification. The CMU-02 is powered by 12V DC power adaptor with battery backup provided by 4 x D cell batteries.

Dimensions: H 205 mm x W 145mm x D 42mm. Reports status of all devices commissioned to the system including, low battery, system faults, missing or broken items Any number of central monitors can be used with or added to a system.

ORDER CODE CMU-02 PRICE Ł180.00 + VAT

SEE NURSE CALL SYSTEMS

ITEMS SHOWN FORM KIT RON-WC1

Display pager with voice announcement of active pull cord alarm number. Backlit display shows toilet alarm number. Signalled by ILB-03 repeater unit. Operates from 2 x AA batteries with low battery warning. Belt clip and table top stand.

ORDER CODE PAG-03 PRICE Ł32.00 + VAT