Manufacture & Supply of Care provider products, Telecare aids,
Radio paging products, Products for Deaf and hard of hearing people.

BSI Quality Assurance
Established 1984
Quality Product - Quality Service

3 Melbourne House
Corby Gate Business Park
Priors Haw Road
Corby, Northants
N17 5JG

Tel: 01536 264 869
Fax 01536 269 719

Home Page

Epilepsy Alarms

Caregiver Electronic Alarms & Monitors

Remote Control Products & Radio Paging System

Products For Deaf & Hard Of Hearing People

About Easylink

Complete Product Listing Page

Contact Details

Ordering Details

Medpage Limited Website

New Products Available soon

Request a catalogue

Epilepsy alarms

Radio paging

Bed leaver alarms

Baby breathing monitor
alarm

Visit www.medpage-ltd.com
for more products, information and on-line ordering

PHOTO-ELECTRIC BEAM SENSORS - INFRARED BEAM ALARM

The FT25B is a two part infrared beam system. The infrared beam receiver is powered by 12V DC and is equipped with an output relay having N/O N/C contacts. The transmitter can be powered by either 12V DC or 2 x AA 3.6V Lithium batteries. Battery life is over two years. Installation is very quick and strait forward with easy beam alignment.

Typical uses include:

·

Automatic gate controllers - gate or walk-way alarm systems.

·

Shop doorway-entrance alarms (see transmitter kits)

·

Burglar alarm systems - interface with existing alarm systems.

·

Automatic lighting controllers

·

Detection of people in restricted areas

·

Vehicle alarms - detection of forklift trucks over height limit etc

·

Garage parking warning lights and shed alarms.

Some typical kits are detailed below.

ORDER CODE (BEAM SET ONLY) FT25B PRICE £54.00 + VAT

General Specifications:

IR Transmitter
Dimensions: 110 x 50 x 25mm - Weight 200g
IP Rating: 45 Consumption: 500 uA. Wavelength 950nm - Power: 2 x Lithium-Tionyle Chloride 3.6 V or 12-24 V DC external supply (on-board jumper select.
Beam range: 25M 8M external use.
Working temp: -20 + 70°C

IR Receiver and alarm output

Power: 12 V DC - Relay contact 0.5A @ 24V DC
Dimensions: 110 x 50 x 25mm - Weight 200g
Power: 12-24 V DC - Consumption 30 mA

BEAM KIT WITH 100M RANGE PAGER

Beam alarm kit using the FT25B as above. Transmitter controller fitted with on-off switch. Break beam, transmitter signals pager up to 100M distance. All connecting cables, power supply and batteries are supplied. Simple installation and use. Waterproofing kit supplied for external use. Battery operated pager (2 x AA) features tone, vibrate, vibrate + tone alert. Full instructions for installation and use included.

ORDER CODE FT25B 371 PRICE FOR KIT £76.20 + VAT

INFRARED TRANSMITTER INFRARED RECEIVER

INFRARED BEAM ALARM WITH POCSAG MESSAGE TRANSMITTER

This kit uses the FT25B beam set as detailed above. The transmitter is a messaging transmitter that sends pre-programmed messages to an alphanumeric display pager that displays messages of up to 40 characters. If multiple beams are used, location messages can be sent to the pager. Gate 4, as an example. The range of the transmitter is 400 Metres and can be extended to 1.5 KM using a the EM1500U signal repeater. The beam kit is supplied with a power supply and can be powered by a 12 Volt DC source such as a car battery. Suitable for outdoor use.

ORDER CODE FT25BM838 PRICE £144.75 + VAT (FULL KIT PRICE)

Beam set with transmitter only ORDER CODE FT25B838TX PRICE £90.00
Alphanumeric pager only ORDER CODE EM100 PRICE £54.75 + VAT

CLICK HERE FOR TRANSMITTER & PAGER SPECS