Specialist Monitor for Seizure Movement Detection

Suitability The Medpage MP5V2 is suitable for people aged 1 month and above with a minimum body weight of 9lb (4.08Kg). The monitor sensor is suitable for use on single and double beds and all cot types. The MP5V2 is for the detection of seizures where there is body movement, so only when the patient’s seizures cause movement will they be detected, even if very minute.

If the mains power supply is interrupted either by the power adaptor removed from the mains supply or damage to cables or power cut, visual indication is provided. Additionally, if the monitor operates on battery backup in excess of 10 hours, a low backup battery warning is transmitted to the alarm pagers.

Use In Hospitals, Care & Nursing Homes

The MP5V2 can be connected directly to a nurse call system, also to a community alarm. Should the alarm be activated, an alarm output is produced to trigger the nurse call system or community alarm device. Certain features can be enabled/disabled within the system software to suit specific requirements. The default setting is suitable for all nurse call systems. As nurse call inputs can vary we advise a call to our Helpline (01536 264 869) to ensure the correct connector is supplied with the monitor. It is still possible to use the alarm pagers in conjunction with the nurse call function.

© 2017 Medpage Limited T/A Easylink UK. The material contained in this webpage may not be copied or reproduced in any way without prior consent. The products detailed on this webpage are only available through Medpage Limited and authorised distributors.

ORDER CODE MP5V2 PRICE £325.00 + VAT (£390.00)

VAT Exemption is available in the UK for this item. Click VAT exemption to read the procedure and download the appropriate form. When we receive the completed form a refund of the VAT amount will be sent to you either electronically of by post.

Medpage MP5V2





The MP5V2 utilises patented sensor technology to provide reliable bed seizure alarm detection from a wider range of seizure types, bed types, and patient body weight. A high specification microprocessor continuously monitors the patient’s bed, analysing detected movements. Suitable for all age groups from 5lb baby to adult. Extended sensitivity adjustment for memory foam mattresses.


The Medpage Model MP5V2 epileptic seizure movement detector is designed to detect a variety of seizure types from all ages, including tremor, Tonic phase and seizures that cause limb twitching movements. The high performance sensor and control software positively identifies seizure movement from a sleeping person, ignoring usual sleeping movements. In fact, the MP5V2 sensor can detect a mouse moving across a bed. A verified ongoing seizure results in an alarm transmission to the carer pagers with a working range of 100M (2 supplied).  The sensor (300mm x 200mm x 10mm) has a sensitivity control to allow adjustment for patient body weight and bed/cot mattress type. A permissible movement alarm delay also has a control dial allowing adjustment from 2 – 30 seconds. This setting allows a person to turn over, or reposition themselves without an alarm generated. Settings are digitally stored to prevent tampering or accidental adjustment.

For people that vocalise during or preceding a seizure, the monitor has a built in microphone frequency tuned to detect human sounds. Detected sounds result in an alarm transmission to the carer pagers. When you need to trust the safety and performance of a device to guard your pride and joy rest assured, Medpage Limited is accredited by BSI to ISO 13485:2003 and ISO 9001 for the manufacture and distribution of medical devices and our monitors are laboratory tested and certified.

ALSO SEE NEW Children’s high sensitivity  bed seizure epilepsy alarm SEE MODEL FOR USA CARING FOR PEOPLE Assistive technologies to aid independent living
T: +44 (0) 1536 264 869